BUFFING SUPPLIES

Formax offers an assortment of accessory buffing supplies to complete your operational needs.


STEEL SIDE PLATE END FLANGES VENTILATED TYPE “FT”

Metal center, bias-type buffs should be properly clamped together by drawing up tightly between steel end flanges. This provides unit strength, prevents possible distortion and breakage of the metal hubs, and slippage between the assembled buff sections. The outside diameter of the side plate end flanges should be at least 1" larger than the inside diameter of the buff center hub.

Product # For Use With Thickness
515-569 4-1/4” Flange for 3” Center Buffs 1/4"
515-570 *6” Flange for 5” Center Buffs 1/4"
515-571 *8” Flange for 7” Center Buffs 1/4"



*Standard Arbor Hole size is 1-1/4", other sizes available subject to additional set-up fee. When ordering, specify: Product Number, Diameter, Arbor Hole size and Quantity.

____________________________________________________________________________________

BUFFING WHEEL RAKE

A handy tool for removing dried compound, fluffing buffing wheels, and truing their faces. Formax rakes are easy to use, just move the heavy-gauge steel rake across the wheel face while it's running. Rakes are attached to sturdy hardwood handles, and are easily replaceable.

Product #   Description
515-573 Wheel Rake and Handle
515-574 Replacement - Metal Rake
____________________________________________________________________________________

BELLY-PAD BUFFING APRON

The Belly-Pad Buffing apron is a covering designed to protect the polisher's body mid-section. It's made of heavy drill and twill cotton fabric, plied to 1/2" or more thickness and sturdily sewn. Straps of long-length, nylon, seat-belt webbing, with plastic buckles, provide ample adjustment for all girths.

Product #                Size
515-576 18” Wide x 11” Deep
____________________________________________________________________________________

“UNLOADER” ABRASIVE CLEANING ERASER 

Restores clogged loaded and glazed abrasive belts, sanding discs and drums, by removing embedded grinding debris lodged and packed between the abrasive grit particles. Works like a giant eraser. Simply hold and press the "Unloader" cleaning eraser firmly against the running abrasive, for a few seconds, until loaded particles have been removed.

Product #        Bar Size
515-581 8” x 1-1/2” x 1-1/2”
____________________________________________________________________________________

“CLEAN-BRIGHT” WHITING POWDER

To remove light grease haze for better observation of the buffed surface. Sprinkle on the work piece and wipe off with a soft clean cloth or cotton glove.

Product #          Container Description
515-6230 5-Gallon Plastic Pail
Let  FORMAX®  be your source for buffing and polishing products!

Formax Manufacturing Corporation · 168 Wealthy St. S.W. · Grand Rapids, MI 49503
Toll Free: (800) 242-2833 · Phone: (616) 456-5458 · Fax: (616) 456-7507

|  Mindscape